Zoom TAC-2 Thunderbolt Audio Interface


Item No. 730185
Alt. Part # ZTAC2
UPC Code 884354012656
0 reviews Write a review
Blazing speed. Amazing sound In today's world, speed is everything. The blazingly fast Zoom TAC-2 interface uses the latest Thunderbolt technology  for ultra-low latency and the ultimate in high-quality audio, up to 24-bit/192kHz. Lightweight and portable, the TAC-2 is also easy to use, with a
Item is discontinued, this product cannot be ordered
Blazing speed. Amazing sound
In today's world, speed is everything. The blazingly fast Zoom TAC-2 interface uses the latest Thunderbolt technology  for ultra-low latency and the ultimate in high-quality audio, up to 24-bit/192kHz. Lightweight and portable, the TAC-2 is also easy to use, with a single large rotary knob controlling all parameters.
Zoom TAC-2 Thunderbolt Audio Interface features:

2-in/2-out high speed Thunderbolt audio interface
Support for recording and playback up to 24-bit/192kHz
Ultra-low latency audio streaming
Two combo balanced XLR/TRS input connectors
+48V phantom power for each input
Hi-Z input jack allows direct connection of electric guitar or bass
Two balanced TRS output jacks for connection to amplifiers or self-powered speakers
Dedicated headphone jack with independent level control
7-position LED metering for input, output and headphone volume
High-performance Burr Brown mic preamps with up to +60dB of amplification
4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity
Asynchronous transfer system unaffected by computer jitter
Bus powered—no AC power required
Simple user interface—all operations controlled by a single rotary knob
Rugged yet compact and lightweight
Works with all Thunderbolt-equipped Macintosh computers running OS X 10.8.5 or later

In the box:

Operation manual
TAC-3 Thunderbolt Audio Interface
Thunderbolt cable (1m)

Thunderbolt: The ultimate in high-speed connectivity
More than twice as fast as USB 3.0—not to mention twenty times faster than USB 2.0 and twelve times faster than Firewire 800—Thunderbolt is the interconnection technology of the future. Co-developed by Apple and Intel Labs, it allows signal to be transferred at an incredibly fast 10 gigabits per second, which means virtually no latency.* Thunderbolt interfaces such as the TAC-2 are also unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source.
In addition, Thunderbolt carries 10 watts/18 volts of power (as compared to the 2.5 watts/ 5 volts carried by USB 2.0)—enough to provide stable phantom power. This also allows the use of high-end components such as the Burr Brown PCM4202 analog-to-digital converter and AKM AK4396 digital-to-analog converter in the TAC-2.
The TAC-2 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1kHz or 48kHz, the TAC-2 processes the signal at high resolution 176.4kHz or 192kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity.
* Latency time in the TAC-2 is just 4.17 msec round trip when operating at a 44.1kHz sampling rate with a 64 sample buffer size.
The Ins and Outs
The Thunderbolt port on the rear panel carries digital signal to and from your computer as well as carrying power to the TAC-2. Two combo XLR/TRS inputs are provided for the connection of mic- and line-level signals, and there's a handy Hi-Z (high impedance) unbalanced input on the front panel for direct connection of passive electric guitars and basses using a standard ¼" guitar cable. The TAC-2 also offers two balanced TRS output jacks which allow you to connect the TAC-2 to your monitors, as well as a dedicated ¼" stereo headphone jack.
The TAC-2's single rotary control knob is used to set input, output and headphone levels and to provide +48 volts of phantom power to the selected input, allowing you to use the TAC-2 with any kind of microphone, from low-cost dynamics to expensive studio-quality condensers. Seven-position LEDs show continuous signal strength as well as input/output overload clipping.
Zoom TAC-2 MixEfx
TAC-2 MixEfx  is a free Macintosh application designed specially for the TAC-2. With TAC-2 MixEfx, you can set mix parameters and add high-quality effects such as reverb and echo. Other features include a low cut filter, phase reverse, AUTO GAIN control for each input. There's also a LOOPBACK function that allows you to blend the input signal and playback signal for zero latency. TAC-2 MixEfx has three memory slots for saving user settings with quick recall.
Using the TAC-2
Whether using it in your home studio or on the road, you can rely on your TAC-2 to deliver pristine audio. Here are just a few ways you can use it:

Recording voice and instruments. Enhance your music by adding your own instruments and voice. The TAC-2 makes it easy to do: Simply connect microphones and instruments to the inputs and then connect the TAC-2 to your computer's Thunderbolt port. The extremely low latency provided by Thunderbolt technology ensures that you can overdub to existing tracks with little or no audible delay.
Routing audio signal to and from editing software. Just connect the TAC-2 to your computer via Thunderbolt and then plug the audio source (such as a portable recorder, mixing console or music player) into the TAC-2's inputs. You can monitor signal coming from the software via headphones or by connecting the TAC-2 outputs to amplifiers or self-powered speakers.
Onstage playback of audio from your computer. The TAC-2 allows you to use your laptop to deliver high quality sound onstage—simply connect it to your computer with a Thunderbolt cable and then connect the TAC-2's rear panel TRS outputs to your mixing board or PA system. That's all it takes to turn your laptop into a live instrument.
Listening to high-resolution audio. MP3s can sound good, but high resolution audio files—24/96 or 24/192 WAVs—sound way better. Now you can enjoy streamed high resolution files in full fidelity by connecting your computer to the TAC-2 via Thunderbolt and using the TAC-2 headphone jack instead of the one on your computer. Alternatively, you can use the rear panel balanced TRS outputs to connect the TAC-2 to your speakers. 

INPUT 1/2 connectors        

Type: XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot)
Input gain: 0, 9 to 60 dB (3dB step)
Input impedance: 3kΩ
Maximum input level: +12 dBu (@0dBFs)
Phantom power: +48V

Hi-Z (INPUT1) connector    

Type: 1/4" phone jack
Input impedance: 1MΩ
Maximum input level: +10 dBu (@0dBFs)

L/R connector

Type: 1/4" TRS phone jack (Balanced)
Maximum output level: +14 dBu (@0dBFs)
Output impedance: 100Ω

PHONES connector

Type: 1/4" stereo phone jack / 20mW + 20mW (into 32Ω load)
Maximum output level: +8 dBu (@0dBFs)
Output impedance: 30Ω

Audio channels (recording): 2
Audio channels (playback): 2
S/N ratio EIN: 125dB (IHF-A) @ 60dB, 150Ω input
Sampling frequency: 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHz
Bit depth: 24-bit
AD/DA conversion                                      

Type:  4x upsampling
Chipset: Burr Brown PCM4202 (A/D) / AKM AK4396 (D/A)
Frequency response: -2.0 dB: 20 Hz - 60 kHz @ 192kHz / -2.0 dB: 20 Hz - 40 kHz @ 96kHz / -2.0 dB: 20 Hz - 20 kHz @ 44.1kHz

Dynamic range

A/D: 118dB typical (IHF-A)
D/A: 120dB typical (IHF-A)

Interface: Thunderbolt
Power: Thunderbolt Bus Power
Dimensions: 129.5mm(D) x 120.0mm(W) x 51.3mm (H)
Weight: 420g
Reviews (0)
There are no reviews yet.