Student Dry Erase Staff Board11"x16"
This student dry erase board is made from solid wood by-products, with all corners and edges rounded for safety and durability.
Each of the 2 staves is approx. 2-1/4" deep (about 1/2" between each line of the staff). There is a little over 1" between the 2 staves, leaving about 4-1/2" of blank board under the staves.
To clean these markerboards:
First off, DO NOT USE abrasive cleaners. Old fashioned Comet cleaner is good for the bathtub, but bad for the Dry Erase Board.
If you accidentally use a regular marker or a Vis-A-Vis on your dry erase surface you will probably get it off with a water dampened cloth. This is normal with all dry erase surfaces. If you get something on your board that doesn't want to clean off, don't panic. You may be able to remove it from your board by going over the mark with your dry erase marker and then erasing.
If that does not clean it off there are markerboard cleaners you may purchase from various office supply stores. Most cleaners actually consist of a weak dry erase marker solution. To do a heavy duty cleaning of our boards we recommend using some non-acetone fingernail polish remover on a soft cloth or paper towel. This method works better and costs less than commercial board cleaner. On boards purchased elsewhere, check with the manufacturer to avoid damaging your board.