Audio-Technica Artist Series ATM-DRUM7 7-Piece Drum Microphone Set

The ATM-DRUM7 Drum Pack includes a core selection of five microphones engineered explicitly for kick, snare, and tom drum applications, along with two microphones ideal for drum overhead miking. The ATM-DRUM7 pack gives you a complete set of drum mics for live performance and home recording.

All of the microphones in the pack – one ATM250 hypercardioid kick drum mic, one ATM650 hypercardioid snare mic, three ATM230 hypercardioid floor/rack tom mics, and two ATM450 cardioid overhead mics – feature a low-profile design for minimum visibility and versatile placement options around the drum kit. They are engineered to handle fast transients and high SPLs(Sound Pressure Level) and deliver superior off-axis rejection.

Also included in the package are the specified clamps for each microphone, four 5/8"-27 to 3/8"-16 threaded adapters, and a hard carrying case with a die-cut foam interior to hold all microphones and accessories.

The ATM-DRUM7 Drum Pack mic kit includes:

ATM250 Hypercardioid Dynamic Instrument Microphone (1 included)

• Tailored for use on kick drums
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Durable, proven performance for professional applications
• Hi-ENERGY® neodymium magnet for improved output and transient response
• Superior off-axis rejection for maximum gain before feedback
• Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp
• Rugged, all-metal design and construction for years of trouble-free use

ATM650 Hypercardioid Dynamic Instrument Microphone (1 included)

• Tailored for use on snare drums
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Durable performance for professional applications
• Unique dual-wall floating construction reduces handling noise and assures consistent performance from the mic to mic
• Hi-ENERGY® neodymium magnet for improved output and transient response
• Multi-stage flat grille design is engineered to enable easy placement as close as possible to sound source
• Rugged, all-metal design and construction for years of trouble-free use
• Includes AT8470 Quiet-Flex™ stand clamp

ATM230 Hypercardioid Dynamic Instrument Microphone (3 included)

• Tailored for use on toms
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Big, warm low-frequency response with excellent attack
• Low-profile design permits versatile placement around the drum kit
• Rugged, all-metal design and construction for years of trouble-free use
• Includes AT8665 drum mount

ATM450 Cardioid Condenser Instrument Microphone (2 included)

• Tailored for use on cymbals
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Unique side-address stick design maximizes placement options with minimal obstructions
• Integral 80 Hz HPF switch and 10 dB pad
• Durable performance for professional applications
• Rugged, all-metal design and construction for years of trouble-free use
• Includes AT8471 isolation clamp for shock protection, secure mounting, and easy positioning
• Pack includes a hard carrying case with die-cut foam interior

Specifications:

• ELEMENT:   ATM250, ATM650, ATM230: Dynamic  ATM450: Fixed-charge back plate permanently polarized condenser
• POLAR PATTERN:  ATM250, ATM650, ATM230: Hypercardioid  ATM450: Cardioid
• FREQUENCY RESPONSE:  ATM250: 40-15,000 Hz ATM650: 80-17,000 Hz  ATM230: 30-12,000 Hz  ATM450: 40-20,000 Hz
• OPEN CIRCUIT SENSITIVITY:  ATM250: -54 dB (1.9 mV) re 1V at 1 Pa  ATM650: -56 dB (1.5 mV) re 1V at 1 Pa  ATM230: -54 dB (1.9 mV) re 1V at 1 Pa  ATM450: -41 dB (8.9 mV) re 1V at 1 Pa
• IMPEDANCE:  ATM250: 600 ohms  ATM650: 300 ohms  ATM230: 600 ohms  ATM450: 200 ohms
• WEIGHT:  ATM250: 252 g (8.9 oz)  ATM650: 279 g (9.8 oz)  ATM230: 292 g (10.3 oz)  ATM450: 98 g (3.5 oz)
• OUTPUT CONNECTOR:  Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED:  Three AT8471 isolation stand clamps; AT8470 Quiet-Flex™ stand clamp; four 5/8"-27 to 3/8"-16 threaded adapters; three AT8665 drum mic clamps; hard carrying case
• Audio-Technica Case Style:  ATM250: R9  ATM650: T5  ATM230: R2 ATM450: S11