Peavey 03010200 Guitar Wireless System, 921.300MHZ

The Peavey PV®-1 UHF instrument wireless system has user friendly features and is available in two, clear channel, UHF frequencies.  This incredibly easy to use wireless comes with everything you need:  receiver, transmitter, and guitar cable included.  Optional rack mount kits are available for one or two receivers side-by-side (sold separately).

The Peavey PV®-1 UHF instrument wireless system features:

• Clear channel UHF operation
• The proprietary *compander* circuitry yields a dynamic range of up to 120dB.
• Squelch control for locking out potential interference.
• Bodypack with input level control.
• Diversity receiver allows for maximum reception range and dropout protection, full LED indicators, both ¼” unbalanced and XLR balanced outputs, and special circuitry for noiseless transmitter ON/OFF switching.

*a compander is a system built into a wireless that compresses the audio signal in the trasmitter, and expands it at the receiver. (compress, expand)*

Specifications:

System:

• Frequency Response:  50Hz – 15 KHz, +/- 3dB
• Dynamic Range:  120dB
• Total Harmonic Distortion:  <0.6%
• RF Carrier:  Frequency Range UHF, choice of single frequencies from 906.000 to 923.700MHz
• Frequency Stability:  +/- 0.005%, Crystal controlled
• Modulation:  FM (F3E), +/-20KHz
• Operating Range:  Up to 250 ft. typical (depending on site conditions); up to 500+ feet optimum line of sight

TRANSMITTER:

• Body pack 3.5mm locking mini-jack
• Body pack requires 2 AA batteries
• OFF/STANDBY/ON, switch
• LED Indicator Unit “ON” (single flash)
• Low Battery Alert (Steady)
• RF Power Out 50mW (max. allowed by FCC)
• Harmonic & Spurious Emissions> - 50dB
• Battery Life up to 8-10 hours
• Dimensions 4.2” x 2.5” .88”(10.7 x 6.4 x 2.2 cm)9.5” x 1.37”(24.1 x 3.48 cm)
• Weight 3 oz (84g) – 7.5 oz (210g)

RECEIVER:

• Reception Mode – Diversity(Dual Antenna)
• Controls – Power ON/OFF, volume control, squelch (mute) control
• Connectors – DC in, ¼” unbalanced phone jack, XLR balanced output
• LED Indicators – Power ON, Audio Peak, A/B Diversity
• Power Requirements – DC 12-15V @ 500 mA, AC/DC adapter included
• Squelch – Tone Key (32.768 KHz), external control
• Unwanted Signal Rejection 60dB image and spurious
• Dimensions 16” x 9.4” x 1.73”
• Weight 1.15 lb (0.52 kg)